Single-Point Load Cell

High-Accuracy, Washdown-Ready Load Cell for Industrial Weighing The 500kg Load Cell – Model 1510 from Tedea-Huntleigh is a high-accuracy single-point load cell designed for industrial applications requiring regular washdowns, such as platform scales, wall scales, and other process weighing systems in the food industry. Constructed from stainless steel and engineered for precision, this load cell delivers reliable, repeatable, and accurate measurements in demanding environments. Download Data Sheet Key Features & Benefits: Capacity: 500 kg (available in 100–500 kg variants) Construction: Stainless steel for corrosion resistance and washdown durability Platform Compatibility: Single-point 600 × 600 mm – suitable for medium to large industrial platforms Accuracy / Class Code: OIML 3000 d C3MR10 – ensures high-precision weighing Mounting Thread Type: MT – secure and easy installation Environmental Protection: IP68 rated – fully protected against dust and prolonged water immersion Output: Standard product – reliable signal for industrial weighing systems Applications: Industrial platform and wall scales Food industry process weighing Washdown-prone industrial environments Limitations: Not ATEX/FM approved – unsuitable for explosive or hazardous environments Smart Tip: The 1510 Load Cell is ideal for applications where precision, durability, and washdown resistance are critical. Description Model 1510 is a high-accuracy single-point load cell ideally suited to industrial applications which undergo regular washdown, typically platforms, wall scales and other process weighing applications in the food industry. Hermetically sealed against moisture, the all-welded construction of the 1510, in combination with a polyurethane dual-shielded cable, enables continuous operation in demanding environments while maintaining a high operating specification. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. Features Capacity range: 100–500 kg Stainless steel construction Single-point 600 x 600 mm platform OIML R60 and NTEP approved IP68 protection Options EEx ia IIC T6 hazardous area approval FM and IECEx approvals available Platform size 600 x 800 mm available Parameter Value Unit Rated capacity (kg) 100, 250, 500 kg NTEP/oiml accuracy class NTEP Non-approved C3 C4 Max. no. of intervals (n) 5000 single 1000 3000 4000 Rated output R.O 2 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 380±10 Ω Output resistance 350±2 Ω Insulation resistance >1000 MΩ Environmental protection IP68 FSO - Full Scale Output All specifications subjects to change whithout notice. Applications Food industry platforms Marine and hybrid scales Process weighing hoppers Demanding environments

Read more less

High-Accuracy, Washdown-Ready Load Cell for Industrial and Food Industry Applications The 250kg Load Cell – 1510 Single-Point from Tedea-Huntleigh is a high-accuracy stainless steel load cell designed for platform scales, wall scales, and other process weighing applications, especially in environments requiring frequent washdown. Engineered for durability and precision, this load cell ensures reliable and repeatable measurements in demanding industrial and food processing environments. Downloand Data Sheet Key Features & Benefits: Capacity: 250 kg (available in 100–500 kg variants) Construction: Stainless steel for superior corrosion resistance and long-lasting performance Platform Compatibility: Single-point 600 × 600 mm – ideal for industrial platforms Accuracy: OIML 3000 d C3MR10 – ensures precise and reliable readings Mounting Thread Type: MT – secure and easy installation Environmental Protection: IP68 rated – fully protected against dust and water immersion Precision Engineering: Perfect for food industry, industrial, and process weighing applications Applications: Platform scales Wall-mounted scales Food industry process weighing Industrial weighing systems requiring high-accuracy and washdown protection Limitations: Not ATEX/FM approved – unsuitable for explosive or hazardous environments Smart Tip: The 1510 load cell is ideal for environments that require high-accuracy weighing combined with full washdown resistance, making it perfect for food and industrial applications. Description Model 1510 is a high-accuracy single-point load cell ideally suited to industrial applications which undergo regular washdown, typically platforms, wall scales and other process weighing applications in the food industry. Hermetically sealed against moisture, the all-welded construction of the 1510, in combination with a polyurethane dual-shielded cable, enables continuous operation in demanding environments while maintaining a high operating specification. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. Features Capacity range: 100–500 kg Stainless steel construction Single-point 600 x 600 mm platform OIML R60 and NTEP approved IP68 protection Options EEx ia IIC T6 hazardous area approval FM and IECEx approvals available Platform size 600 x 800 mm available Parameter Value Unit Rated capacity (kg) 100, 250, 500 kg NTEP/oiml accuracy class NTEP Non-approved C3 C4 Max. no. of intervals (n) 5000 single 1000 3000 4000 Rated output R.O 2 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 380±10 Ω Output resistance 350±2 Ω Insulation resistance >1000 MΩ Environmental protection IP68 FSO - Full Scale Output All specifications subjects to change whithout notice. Applications Food industry platforms Marine and hybrid scales Process weighing hoppers Demanding environments  

Read more less

Compact, Durable, and High-Precision Load Cell for Industrial and Commercial Weighing The 20kg Load Cell – Model 1130 from Tedea-Huntleigh is a low-profile stainless steel single-point load cell engineered for bench and platform scales, packaging systems, and process weighing equipment. Built to perform in demanding environments, this load cell delivers accurate, stable, and repeatable measurements, making it an ideal choice for industrial and commercial applications requiring precision. Download Data Sheet Key Features & Benefits: Capacity: 20 kg (available in 7–100 kg variants) Construction: Stainless steel for long-lasting durability and corrosion resistance Platform Compatibility: Single-point 400 × 400 mm – perfect for standard bench and platform scales Mounting Thread Type: MT – secure and easy installation Environmental Protection: IP66 rated for full dust and water protection Precision Engineering: Ensures reliable readings for commercial, industrial, and packaging weighing applications Applications: Bench and platform scales Packaging machinery Industrial process weighing Limitations: Not ATEX/FM approved – unsuitable for explosive or hazardous environments Smart Tip: The Model 1130 is ideal for applications needing a compact, precise, and highly durable load cell for medium-capacity weighing. Description The Model 1130 is a low-profile stainless steel single point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in demanding environments. The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. Constructed in stainless steel, this high accuracy load cell is approved to stringent approval standards, e.g., OIML and NTEP. The two additional sense wires feed-back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.  Features Capacities 7–100 kg Stainless steel construction Single-point 400 × 400 mm platform OIML R60 and NTEP approved IP66 protection Available with metric and UNC threads Options ATEX, FM and IECEx approvals available Parameter Value Unit Rated capacity (kg) 7, 10, 15, 20, 30, 50, 75, 100 kg NTEP/oiml accuracy class NTEP | Non-Approved | C3 Max. no. of intervals (n) 4000 single | 1000 | 3000 Rated output R.O 2.0 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Creep error 0.0015 | 0.0500 | 0.0200 ±%FSO Temp. effect on sensitivity 0.0030 | 0.0100 | 0.0023 ±%FSO/F Temp. effect on min dead load output 0.0008 | 0.0030 | 0.0010 ±%FSO/F Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 385±15 Ω Output resistance 350±3 Ω Insulation resistance >2000 MΩ Environmental protection IP66 FSO - Full Scale Output All specifications subjects to change whithout notice. Application Demanding environment small platforms Demanding environment check weighing

Read more less

Compact, Durable, and Precise Load Cell for Industrial and Commercial Weighing The 7kg Load Cell – Model 1130 from Tedea-Huntleigh is a low-profile stainless steel single-point load cell designed for bench and platform scales, packaging systems, and process weighing equipment. Engineered for demanding environments, this load cell provides accurate, stable, and repeatable measurements even in challenging industrial applications. Download Data Sheet Key Features & Benefits: Capacity: 7 kg (available in 7–100 kg variants) Construction: Stainless steel for corrosion resistance and long-term durability Platform Compatibility: Single-point 400 × 400 mm – perfect for compact scales Mounting Thread Type: MT – ensures secure and easy installation Environmental Protection: IP66 rated, fully protected against dust and water ingress Precision Engineering: Ideal for industrial, commercial, and packaging weighing applications Applications: Bench and platform scales Packaging machinery Process and industrial weighing Limitations: Not ATEX/FM approved – not suitable for explosive or hazardous environments Smart Tip: The Model 1130 is perfect for applications needing a compact, precise, and durable load cell for small-capacity weighing. Description The Model 1130 is a low-profile stainless steel single point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in demanding environments. The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. Constructed in stainless steel, this high accuracy load cell is approved to stringent approval standards, e.g., OIML and NTEP. The two additional sense wires feed-back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.  Features Capacities 7–100 kg Stainless steel construction Single-point 400 × 400 mm platform OIML R60 and NTEP approved IP66 protection Available with metric and UNC threads Options ATEX, FM and IECEx approvals available Parameter Value Unit Rated capacity (kg) 7, 10, 15, 20, 30, 50, 75, 100 kg NTEP/oiml accuracy class NTEP | Non-Approved | C3 Max. no. of intervals (n) 4000 single | 1000 | 3000 Rated output R.O 2.0 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Creep error 0.0015 | 0.0500 | 0.0200 ±%FSO Temp. effect on sensitivity 0.0030 | 0.0100 | 0.0023 ±%FSO/F Temp. effect on min dead load output 0.0008 | 0.0030 | 0.0010 ±%FSO/F Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 385±15 Ω Output resistance 350±3 Ω Insulation resistance >2000 MΩ Environmental protection IP66 FSO - Full Scale Output All specifications subjects to change whithout notice. Application Demanding environment small platforms Demanding environment check weighing

Read more less

High-Performance Load Cell for Large Platform Weighing The 100kg Load Cell – Model 1260 from Tedea-Huntleigh is a high-capacity single-point load cell designed for direct mounting on large platforms. Engineered for industrial and commercial applications, this aluminum load cell delivers precise, reliable, and repeatable measurements across a wide range of high-capacity weighing tasks. Download Data Sheet Key Features & Benefits: Capacity: 100 kg (available in 50–635 kg variants) Construction: Durable aluminum for lightweight yet robust performance Platform Compatibility: Single-point 600 × 600 mm – ideal for large platform scales Cable Length: 3 m – flexible installation options Environmental Protection: IP66 rated, fully protected against dust and water ingress Precision Engineering: Ensures accurate readings for demanding industrial applications Applications: Large bench and platform scales Industrial process weighing Packaging and commercial weighing systems Limitations: Not ATEX/FM approved – not suitable for explosive or hazardous environments Smart Tip: The Model 1260 is perfect for industrial setups that require a lightweight, high-capacity load cell with uncompromised precision. Description Model 1260 is a high-performance, high-capacity single-point load cell designed for direct mounting of large platforms. Its rugged construction offers high resistance to side forces, making it suitable for a wide range of weighing applications, including bench scales and check weighing. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. For hazardous environments this load cell has an ATEX and FM approval. The two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into appropriate electronics. Features Capacities: 50–635 kg Aluminum construction Single-point 600 × 600 mm platform OIML R60 and NTEP approved IP66 protection Available with metric and UNC threads Options ATEX, FM and IECEx approvals available Parameter Value Unit Rated capacity (kg) 50, 75, 100, 150, 200, 250, 300, 500, 635, 1000 kg NTEP/oiml accuracy class NTEP Non-Approved C3 Max. no. of intervals (n) 5000 single 1000 3000 Rated output R.O 2 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 415±15 Ω Output resistance 350±3 Ω Insulation resistance >2000 MΩ Environmental protection IP66 FSO - Full Scale Output All specifications subjects to change whithout notice. Applications Large platform scales Hanging scales Check weighing

Read more less

Durable and Precise Load Cell for Industrial and Commercial Weighing The 100kg Load Cell – Model 1130 from Tedea-Huntleigh is a low-profile, stainless steel single-point load cell engineered for bench and platform scales, packaging systems, and process weighing equipment. Designed to operate in demanding environments, this load cell delivers accurate, stable, and repeatable measurements, making it ideal for industrial applications requiring reliability and precision. Download Data Sheet Key Features & Benefits: Capacity: 100 kg (available in 7–100 kg variants) Construction: Stainless steel for superior durability, corrosion resistance, and long-lasting performance Platform Compatibility: Single-point 400 × 400 mm – perfect for standard bench and platform scales Mounting Thread Type: MT – easy and secure installation Environmental Protection: IP66 rated for dust and water ingress protection Precision Engineering: Ideal for packaging, industrial, and commercial weighing applications Applications: Bench and platform scales Packaging machinery Industrial process weighing Limitations: Not ATEX/FM approved – unsuitable for explosive or hazardous environments Smart Tip: The Model 1130 is perfect for applications needing compact, high-precision, and durable load cells in demanding industrial settings. Description The Model 1130 is a low-profile stainless steel single point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in demanding environments. The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. Constructed in stainless steel, this high accuracy load cell is approved to stringent approval standards, e.g., OIML and NTEP. The two additional sense wires feed-back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.  Features Capacities 7–100 kg Stainless steel construction Single-point 400 × 400 mm platform OIML R60 and NTEP approved IP66 protection Available with metric and UNC threads Options ATEX, FM and IECEx approvals available Parameter Value Unit Rated capacity (kg) 7, 10, 15, 20, 30, 50, 75, 100 kg NTEP/oiml accuracy class NTEP | Non-Approved | C3 Max. no. of intervals (n) 4000 single | 1000 | 3000 Rated output R.O 2.0 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Creep error 0.0015 | 0.0500 | 0.0200 ±%FSO Temp. effect on sensitivity 0.0030 | 0.0100 | 0.0023 ±%FSO/F Temp. effect on min dead load output 0.0008 | 0.0030 | 0.0010 ±%FSO/F Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 385±15 Ω Output resistance 350±3 Ω Insulation resistance >2000 MΩ Environmental protection IP66 FSO - Full Scale Output All specifications subjects to change whithout notice. Application Demanding environment small platforms Demanding environment check weighing

Read more less

Robust, High-Capacity Load Cell for Large Platform Weighing The 50kg Load Cell – Model 1260 from Tedea-Huntleigh is a high-performance single-point load cell designed for direct mounting on large platforms. Built for industrial and commercial weighing applications, this aluminum load cell delivers reliable, repeatable, and precise measurements even under high-capacity demands. Download Data Sheet Key Features & Benefits: Capacity: 50 kg (available in 50–635 kg variants) Construction: Lightweight yet durable aluminum for long-lasting performance Platform Compatibility: Single-point 600 × 600 mm – ideal for large-scale platforms Cable Length: 3 m – convenient for versatile installations Environmental Protection: IP66 rated, fully protected against dust and water ingress Precision Engineering: Ensures accurate readings for high-capacity industrial applications Applications: Large bench and platform scales Industrial process weighing Packaging and commercial weighing systems Limitations: Not ATEX/FM approved – not suitable for explosive or hazardous environments Smart Tip: The Model 1260 is perfect for applications requiring a lightweight, high-capacity load cell that doesn’t compromise accuracy or durability. Description Model 1260 is a high-performance, high-capacity single-point load cell designed for direct mounting of large platforms. Its rugged construction offers high resistance to side forces, making it suitable for a wide range of weighing applications, including bench scales and check weighing. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. For hazardous environments this load cell has an ATEX and FM approval. The two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into appropriate electronics. Features Capacities: 50–635 kg Aluminum construction Single-point 600 × 600 mm platform OIML R60 and NTEP approved IP66 protection Available with metric and UNC threads Options ATEX, FM and IECEx approvals available Certifications Parameter Value Unit Rated capacity (kg) 50, 75, 100, 150, 200, 250, 300, 500, 635, 1000 kg NTEP/oiml accuracy class NTEP Non-Approved C3 Max. no. of intervals (n) 5000 single 1000 3000 Rated output R.O 2 mV/V Rated output tolerance 0.2 ±%mV/V Zero balance 0.2 ±%FSO Ultimate over load 300 % of R.C Excitation voltage 10 VDC or VAC RMS Max. excitation voltage 15 VDC or VAC RMS Input resistance 415±15 Ω Output resistance 350±3 Ω Insulation resistance >2000 MΩ Environmental protection IP66 FSO - Full Scale Output All specifications subjects to change whithout notice.   Applications Large platform scales Hanging scales Check weighing

Read more less

Download Datasheet  Model 1130 Stainless Steel Single-Point Load Cell – High-Accuracy Weighing Solution Enhance Precision and Reliability in Your Weighing Applications The Model 1130 Stainless Steel Single-Point Load Cell is a low-profile, high-accuracy load cell designed for direct mounting in bench and platform scales, packaging systems, and process weighing equipment. Built for durability and performance, this load cell excels in demanding environments while delivering precise results across a wide range of applications. Key Features & Benefits: Capacities: 7–100 kg, accommodating small to medium load requirements High-Quality Construction: Robust stainless steel body ensures long-lasting performance and corrosion resistance Single-Point 400 × 400 mm Platform: Ideal for compact, low-profile bench and counting scales Exceptional Accuracy: OIML R60 and NTEP approved for reliable weighing performance Environmental Protection: IP66 rated, providing resistance against dust and water ingress Versatile Mounting Options: Available with metric (MT) and UNC threads for flexible installation Stable Performance: Humidity-resistant coating ensures long-term stability across a wide temperature range Enhanced Electrical Compensation: Two sense wires compensate for changes in lead resistance due to temperature variation or cable extension Applications: Bench and platform scales Packaging machinery Process weighing systems Low-profile counting scales Technical Specifications: Rated Capacity: 7, 10, 15, 20, 30, 50, 75, 100 kg Rated Output: 2.0 mV/V ±0.2% Zero Balance: ±0.2% FSO Creep Error: 0.0015–0.05% FSO Temperature Effect on Sensitivity: 0.0023–0.01% FSO/°C Ultimate Overload: 300% of rated capacity Excitation Voltage: 10 VDC or VAC RMS (Max. 15 V) Input/Output Resistance: 385±15 Ω / 350±3 Ω Insulation Resistance: >2000 MΩ Optional Certifications: ATEX FM IECEx The Model 1130 combines small physical size with high precision, making it perfect for applications where space is limited but accuracy cannot be compromised. Whether you are upgrading an existing scale or integrating it into a new system, this load cell delivers reliable, repeatable performance in a compact, durable design. Request a Quote Today to enhance your weighing processes with a dependable, high-performance load cell from Carewell Group.

Read more less