Model 1410 represents a radical new concept in load cell design, which alleviates many of the problems encountered when conventional load cells are used in rotary weighing machines.
Due to a patented damping system, typical settling times of 700 ms are dramatically reduced to less than 300 ms (depending on conditions), significantly reducing cycle times and increasing throughput capabilities.
Centrifugal forces are handled in such away that their effect on output is very small. For example, when tested up to 20 rpm, the total dynamic error amounted to less than 0.2 gram per kg.
Model 1410 provides excellent isolation of base vibrations. Both these features enable the use of higher machine speeds without losing accuracy.
Model 1410’s unique rugged construction makes it very resistant to side loads and can therefore withstand bottle jams and other mishaps.
FEATURES
• The first and only load cell specifically designed for use in rotary filling machines• Short settling times• High resistance to side loads• Effective isolation of base vibrations• Centrifugal forces do not affect accuracy• Two mounting options• Optional: - FM approval available
APPLICATIONS
• Rotary filling machines
The Model 240 is specifically designed to be used where the fast acquisition of a stable load signal is paramount. The Model 240’s unique fluid damping system allows the load cell to be used in applications that previously required the use of LVDT’s or similar measuring devices.
The Model 240 brings load cell adaptability into check weighing and grading applications.
Approved to OIML R60 and NTEP standards, sealed to IP66 level and available in coated steel or stainless steel, the Model 240 is suitable for most wash-down applications.
The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
FEATURES
• Capacities 2–50 kg• Painted steel construction• OIML R60 and NTEP approved• IP66 protection• Available with metric and UNC threads• Optional ❍ Stainless steel construction
APPLICATIONS
• Multi-head filling machines• Check weighing• Grading machines• Liquid filling• Dynamic weighing
The Model 9010 is a self-contained weighing module for use in repeated shock-loading applications or where fast weighing and settling times are required, such as multihead weighers, check weighers and other static and dynamic weighing applications characterized by sudden or impact loading.
The Model 9010’s unique fluid damping system allows the load cell to be used in applications that previously required the use of LVDT’s or similar types of measuring devices.
The Model 9010 has a unique adjustable tare load cancellation feature which brings load cell adaptability into check weighing and grading applications.
The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
FEATURES
• Capacities 3–90 kg• Unique adjustable tare load cancelling mechanism• Highly effective viscous damping• 6 Built-in overload limit stops in three directions• Weighing speed is much faster than standard load cell • IP65 protection • Optional - Stainless steel version - IP66 with additional breather tube - OIML and FM approvals available
