Products

Title :- Model - 65023- Shear Beam Load Cell Brand :- Sensortronics DESCRIPTION  Model 65023 is a low profile shear beam load cell designed for high accuracy platform scales, pallet scales and process weighing applications.  It has high immunity to shock or side loading and is available in 2 or 3 mV/V sensitivity. Approved to OIML and NTEP standards. For hazardous environments this load cell is available with ATEX, UKCA and FM approval. Nickel plating and full environmental sealing assures long term reliability. A stainless steel option is available for the lb versions for use in harsh or corrosive environments. Two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension is achieved by feeding this voltage into the appropriate electronics. FEATURES • Rated capacities of 250 to 20,000 pounds, 125 to 10,000 kg • “Thru” or “threaded” load hole configurations • Low sensitivity to axial loads • Low profile (ultra-low-profile available in 1000 to 2500 pound ranges) • Sensorgage™ sealed to IP67 standards • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. • Non-incendive ratings (without barriers!). • Trade certified for NTEP Class III: 5000d, IIIL: 10000d and OIML R-60 3000d available    Optional  - Hazardous area approval  - Stainless steel versions available  - 65059 TWA companion weighing assemblies available  - EDOC product appearance will differ from the    photograph due to coating APPLICATIONS• Floor scales• Tank weighing • Bin and hopper weighing      

Read more less

Title :- Model 60001 S-Beam Load Cell Brand :- Sensortronics DESCRIPTION The Model 60001 is a tension-compression load cell with a humidity-resistant coating and shielded cables, which enable its use in harsh environments while maintaining operating specifications. Additional sense wires compensate for changes in lead resistance due to temperature change and/or cable extension. Ideally suited for lever conversions, hanging scales, force measurement and a wide range of other industrial applications. Nickel-plated for outstanding corrosion resistance. FEATURES • Rated capacities of 25 to 20,000 pounds, 50 kilograms to 10 metric tonnes • Designed for single or multiple load cell applications • Constructed of high quality alloy tool steel• Nickel plated for outstanding corrosion resistance • Sensorgage™ sealed to IP67 standards• Trade certified for NTEP Class III: 5000d, IIIL: 10000d and OIML R-60 3000d available • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!). • Optional - Stainless steel version is Model 60050 - EDOC option available; product appearance will differ from the photograph due to coating APPLICATIONS • Tank, bin and hopper weighing • Level and inventory monitoring• Truck scale conversions • Tension and compression measurements

Read more less

Title :- Model 60040 Low-Profile Bending Beam Brand :- Sensortronics DESCRIPTIONModel 60040 is a compact, low capacity, alloy-steel, high precision bending-beam load cell.The product’s small size and accuracy makes it ideal for applications that demand high performance from a small package. This load cell is commonly used in platform scales, conveyer scales, and varied process weighing applications.The product is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments. A mounting accessory, Model 65059-TWA, is available for Model 60048. FEATURES • Rated capacities of 25 to 500 pounds• Tension or compression loading capabilities• Compact, low profile design• Sensorgage™ sealed to IP65 standards• Factory Mutual System Approved for Classes I, II, III;Divisions 1 and 2; Groups A through G.Also, non-incendive ratings (without barriers)• Optional- Companion tank weighing assemblies available(Model 65059-TWA) APPLICATIONS• Bin and hopper weighing• Belt conveyor scales• Netweighing

Read more less

Title :- Model 60048 Low Profile Platform Cell Brand :- Sensortronics DESCRIPTION60048 is a high precision, alloy steel, stainless steel, single point platform load cell. The product’s availability in capacities ranging from 25 to 1000 lbs. makes it ideal for many low to mid range capacity weighing applications. The load cell is most commonly used in platform scales, but can be adapted for use in many process weighing applications. The stainless steel construction and IP67 sealing make this load cell ideal for demanding environment applications.The product is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments. FEATURES• Rated capacities of 25 to 1000 pounds• Constructed of alloy steel, stainless steel• Moment-compensated design for minimal sensitivityto moments induced by off-center loading• Exceeds NIST H-44 requirements• Provides optimum protection under adverseloading conditions• Sensorgage™ sealed to IP67 standards• Factory Mutual System Approved for Classes I, II, III;Divisions 1 and 2; Groups A through G.• Non-incendive ratings (without barriers) APPLICATIONS• Single-point platform scales• Belt conveyor scales• Bench and counting scales• Checkweighing scales• Hopper scales and netweighing  

Read more less

Title :- Model 60051 Low Profile Platform Cell Brand :-  Sensortronics DESCRIPTION Model 60051 is a low profile high precision, stainless steel, single point platform load cell. The product’s low profile makes it ideal for many low to mid-range capacity weighing applications where space is at a premium. This load cell is most commonly used in platform scales, but can be adapted for use in many process weighing applications. The stainless steel construction and IP67 rating make this load cell ideal for any environmental installation. This load cell is specifically designed for use in corrosive and wet environments that are not appropriate for common aluminum load cells. This product is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments.  FEATURES • Rated capacities of 10 to 200 pounds • Stainless steel construction • Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Sensorgage™ sealed to IP67 standards • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. • Non-incendive ratings (without barriers) APPLICATIONS • Single-point platform scales • Bench, counting and deli scales • Check weighing scales • Hopper scales and net weighing

Read more less

Title :- Model 60058 Double-Ended Shear Beam Load Cell Brand :- Sensortronics  DESCRIPTION The Model 60058 is a mid to high capacity nickel-plated alloy steel, double-ended shear beam load cell. This product is designed for use in industrial and out door environments. Nickel plated steel construction limits corrosion from outdoor use. The IP67 sealing makes it suitable for applications that are subject to high-pressure wash down. Tank weighing is made simple when this load cell is combined with the EZ mount mounting hardware it was designed for. Its high accuracy and availability in high capacities make it ideal for certified truck and rail scales. This load cell is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments. This load cell is certified for Legal For Trade applications by the American NTEP standards. FEATURES • Rated capacities of 5,000 to 100,000 pounds, 2.3 to 45 metric tonnes • High quality alloy tool steel construction • Nickel plated for outstanding corrosion resistance • Replacement for RTI model 5103 (EZM1) • Integral conduit adaptor • Sensorgage™ sealed to IP67 standards• Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!) • Optional - EDOC option available; product appearance will differ from the photograph due to coating APPLICATIONS • Tank, bin, and silo weighing • Railroad track scales • Truck scales

Read more less

Title :- Model 60060 Low Profile Platform Load Cell Brand :- Sensortronics DESCRIPTION Model 60060 is a single point load cell designed for direct mounting of large platforms. The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products. This high accuracy load cell is approved to OIML R60, NTEP and other stringent approval standards. Suitable for use in hazardous environments, these load cells are FM approved to Class I, II, III, Division 1 and 2. A special humidity-resistant protective coating assures long term stability over the entire compensated temperature range. Two additional sense wires, sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. FEATURES • Rated capacities of 100 to 2000 pounds • Unique shear beam design—aluminum construction• Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Ideal for situations exceeding the capabilities of similar “brick” design load cells • Trade certified for NTEP Class III:5000 divisions; Class IIIL:10000 divisions and OIML R60 3000 divisions • Sensorgage™ sealed to IP67 standards • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. • Non-incendive ratings (without barriers)• Available in stainless steel APPLICATIONS • Single-point platform scales • Belt conveyor scales • Bench and counting scales • Check weighing scales • Hopper scales and net weighing

Read more less

Title :- Model 60063 Stainless Steel, Welded Seal S-Beam Load Cell Brand :- Sensortronics DESCRIPTION The Model 60063 is a stainless steel S-Type load cell. Its welded sealing, combined with high accuracy, make this load cell ideally suited for a wide range of applications of process weighing and force measurement.  Approvals included NTEP III 5000d single and NTEP IIIL10000d multiple. Also available are versions approved for hazardous areas - FM I, II, III Division 1. FEATURES • Rated capacities of 500 to 20,000 pounds • Stainless steel, welded seal construction • Integrated loading brackets • Compatible with TCM tension mounting hardware • Designed for single or multiple load cell applications • Trade certified for NTEP Class IIIL: 10000d and III: 5000d • Sensorgage™ sealed to IP68 standards• Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!)• Optional  - Mounting and loading accessory hardware available  APPLICATIONS • Hostile environments: Food and beverage processing Chemical and plastics processing Pharmaceutical and biomedical • Bin, hopper and belt conveyor scales • Level and inventory monitoring • Tension and compression measurements

Read more less

Title :- Model 65016-W Welded, Stainless Steel Double-Ended Shear Beam Load Cell Brand :- Sensortronics DESCRIPTION Model 65016-W is designed to be center-mounted with double-linked loading. This design provides free movement in all horizontal directions, virtually eliminating binding or friction points. The double Shear Beam design gives an excellent performance for high capacity loading.  The stainless-steel construction and IP67 rating make this load cell ideal for any environmental installation. FEATURES • Rated capacities of 1000 to 100,000 pounds • Stainless steel, welded seal construction • Insensitive to side loads and bending moments • High output—well suited to high dead load/low live load applications • Load cells have matched outputs for multi-cell systems • Integral conduit adaptor• Sensorgage™ sealed to IP67 standards• Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G.• Non-incendive ratings (without barriers)• Optional  - Fully hermetically sealed version APPLICATIONS • Hostile environments:    Food and beverage processing    Chemical and plastics processing Pharmaceutical and biomedical processing • Tank, bin, and silo weighing • Batching, blending and mixing systems • Level and inventory monitoring  

Read more less

Title :- Model 65040W Steel, Welding Sealed Double-Ended Shear Beam Load Cell Brand :- Sensortronics  DESCRIPTION Model 65040W is a mid to high-capacity welded stainless-steel, double-ended shear beam load cell. The product is designed for use in certified truck and rail scales and is available in capacities ranging from 25k through 75k lbs. (For higher capacities consult with the factory.)  This load cell is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially-explosive environments. This load cell is certified for Legal for Trade applications by American NTEP standards. FEATURES • Rated capacities of 25,000 to 75,000 lbs. (Higher capacities are also available)• Welded seal, stainless-steel construction • Center supported, external pivot loading• Integral conduit adaptor • Trade certified for NTEP Class IIIL: 10000 divisions • Sensorgage™ sealed to IP68 standards• Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. • Non-incendive ratings (without barriers) APPLICATIONS • Hostile environments:   Food and beverage processing   Chemical and plastics processing   Pharmaceutical and biomedical processing • Truck scales • Railroad track scales 

Read more less

Title :- Model 65058 Double-Ended Shear Beam Load Cell Brand :-  Sensortronics  DESCRIPTION  The Model 65058 is a mid to high capacity, nickel-plated alloy steel, double ended Shear beam load cell. This product is designed for use in certified truck and rail scales and is available in capacities ranging from 10,000 to 250,000 lbs. This load cell is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments. This load cell is certified for legal for trade applications by both American NTEP and International OIML standards. FEATURES • Rated capacities of 10,000 to 225,000 lbs• Center-link loaded• Integral conduit adaptor• Trade certified for NTEP Class IIIL: 10000 divisions; Class III: 5000 divisions and OIML R60 3000 divisions in 20,000 to 100,000 lbs range• Sensorgage™ sealed to IP67 standards• Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!).• Optional - EDOC (Electrodeposited organic coating): product appearance will differ from the photograph due to coating - 65058S stainless steel, welded seal version available - 65058-TSA companion assemblies for vehicle scales - 65069-TWA companion assemblies for vessel weighing APPLICATIONS • Truck scales• Railroad track scales• Precision tank, bin and silo weighing• Level and inventory monitoring

Read more less

Title :- Model 65083 Stainless Steel, Welded Seal Shear Beam Load Cell Brand :- Sensortronics DESCRIPTIONThe Model 65083 provides the weighing industry with excellent protection necessary for today’s hostile environments in an economical low profile range suitable for platform scale manufacture. Its low profile and fully welded sealing, combined with high accuracy, makes this load cell ideally suited for low profile platforms, pallet truck weighers, tanks and silos.The guide slots incorporated into the upper and lower mounting faces enable manufacturers to easily position the load cell . Hermetically sealed against moisture, the construction of the model 65083 in combination with a polyurethane dual shielded cable, enables continuous operation in harsh environments while maintaining a highoperating specification. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.  FEATURES• Rated capacities of 1000 to 20,000 pounds• Stainless steel, welded seal construction• Trade certified for NTEP Class IIIL 10000 and III 5000divisions and OIML R-60 3000 divisions• Hostile or clean environment• Sealed to IP67, IP68 or IP69K rating• Factory Mutual System Approved for Classes I, II, III;Divisions 1 and 2; Groups A through G.Also, non-incendive ratings (No barriers!)• Optional- Integral conduit adaptor with teflon jacketed cableavailable- EDOC option available; product appearance will differfrom the photograph due to coating APPLICATIONS• Hostile environments: food and beverage processing,chemical and plastics processing,pharmaceutical and biomedical processing• Tank, bin and hopper weighing• Batching, blending and mixing systems

Read more less