Single Point Bending Beam

Title :- Model 1252 Aluminum Single-Point Load Cell Brand :- Tedea-Huntleigh DESCRIPTIONThe Model 1252 is a high capacity single-point load cell fully interchangeable with the Model 1250, designed for direct mounting of the weighing platform or side cellapplications. Resulting from simpler scale construction, the Model 1252is a cost-effective load cell for use in counting, weighing , bench or floor scale productions.A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. This load cell has Factory Mutual approval and IP66 protection.The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of change in the lead wires resistance, due to temperature change and/or cable extension, is achieved by feeding thisvoltage into the appropriate electronics FEATURES• Capacity range: 75–635 kg• Aluminum construction• Single-point 600 × 600 mm platform• OIML R60• IP65 protection• Available with metric and UNC threads• Optional - ATEX, FM and IECEx approvals available APPLICATIONS• Large platform scales• Hanging scales• Check weighing

Read more less

Title :- Model 1320 High Capacity Single-Point Load Cell Brand :- Tedea-Huntleigh DESCRIPTIONModel 1320 is a high-capacity single-point load cell, designed for direct mounting of low profile, high capacity weighing platforms up to 1200 × 1200 mm.Its large platform size simplifies the construction of floor scales, weigh bars, hanging scales and other types of weighing machines with a capacity up to 2000 kg. All load cells are individually adjusted to eliminate corner errors, tested and calibrated to meet OIML specifications.A special humidity-resistant coating assures long-term reliability. The two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. FEATURES• Capacities: 1000–2000 kg• Aluminum construction• Single-point 1200 × 1200 mm platform• OIML R60 and NTEP approved• IP66 protection• Available with metric threads• Optional- FM Approval, ATEX, IECEx and UKCAcertifications available. APPLICATIONS• Very large platform scales• Hanging scales• Check weighing

Read more less

Title :- Model 380 Co-Planar Beam Load Cell Brand :- Tedea-Huntleigh DESCRIPTION Model 380 is a very low-profile planar beam design, allowing direct mounting in low-profile platform scales. The range of capacities and low profile make Model 380 most suitable for use in a wide range of applications. FEATURES • Capacity range: 7.5–250 kg • Only 2.5–8 mm high • Very low profile • Aluminum construction • OIML R60 and NTEP approved.• IP65 protection • 1000Ω input impedance • Provides freedom in rectangular scale size design • Matched output and current calibration circuitry OPTIONAL• ATEX and UKCA certification available for potentially explosive atmospheres. APPLICATIONS • Personal scales • Commonly used in low-profile infant and adult medical scales • Large and medium low-profile platform scales • Airport baggage scales • Postal scales 

Read more less

Title :- Model 60048 Low Profile Platform Cell Brand :- Sensortronics DESCRIPTION60048 is a high precision, alloy steel, stainless steel, single point platform load cell. The product’s availability in capacities ranging from 25 to 1000 lbs. makes it ideal for many low to mid range capacity weighing applications. The load cell is most commonly used in platform scales, but can be adapted for use in many process weighing applications. The stainless steel construction and IP67 sealing make this load cell ideal for demanding environment applications.The product is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments. FEATURES• Rated capacities of 25 to 1000 pounds• Constructed of alloy steel, stainless steel• Moment-compensated design for minimal sensitivityto moments induced by off-center loading• Exceeds NIST H-44 requirements• Provides optimum protection under adverseloading conditions• Sensorgage™ sealed to IP67 standards• Factory Mutual System Approved for Classes I, II, III;Divisions 1 and 2; Groups A through G.• Non-incendive ratings (without barriers) APPLICATIONS• Single-point platform scales• Belt conveyor scales• Bench and counting scales• Checkweighing scales• Hopper scales and netweighing  

Read more less

Title :- Model 60051 Low Profile Platform Cell Brand :-  Sensortronics DESCRIPTION Model 60051 is a low profile high precision, stainless steel, single point platform load cell. The product’s low profile makes it ideal for many low to mid-range capacity weighing applications where space is at a premium. This load cell is most commonly used in platform scales, but can be adapted for use in many process weighing applications. The stainless steel construction and IP67 rating make this load cell ideal for any environmental installation. This load cell is specifically designed for use in corrosive and wet environments that are not appropriate for common aluminum load cells. This product is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments.  FEATURES • Rated capacities of 10 to 200 pounds • Stainless steel construction • Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Sensorgage™ sealed to IP67 standards • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. • Non-incendive ratings (without barriers) APPLICATIONS • Single-point platform scales • Bench, counting and deli scales • Check weighing scales • Hopper scales and net weighing

Read more less

Title :- Model 60060 Low Profile Platform Load Cell Brand :- Sensortronics DESCRIPTION Model 60060 is a single point load cell designed for direct mounting of large platforms. The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products. This high accuracy load cell is approved to OIML R60, NTEP and other stringent approval standards. Suitable for use in hazardous environments, these load cells are FM approved to Class I, II, III, Division 1 and 2. A special humidity-resistant protective coating assures long term stability over the entire compensated temperature range. Two additional sense wires, sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. FEATURES • Rated capacities of 100 to 2000 pounds • Unique shear beam design—aluminum construction• Moment-compensated design for minimal sensitivity to moments induced by off-center loading • Ideal for situations exceeding the capabilities of similar “brick” design load cells • Trade certified for NTEP Class III:5000 divisions; Class IIIL:10000 divisions and OIML R60 3000 divisions • Sensorgage™ sealed to IP67 standards • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. • Non-incendive ratings (without barriers)• Available in stainless steel APPLICATIONS • Single-point platform scales • Belt conveyor scales • Bench and counting scales • Check weighing scales • Hopper scales and net weighing

Read more less

Title :- Model HPS Single-Point Load Cell Brand :- Revere DESCRIPTION Model HPS is a unique, fully-welded all-stainless-steel single-point (moment insensitive) load cell. The product is suitable for low capacity platform scales, multi-head packaging machines, check weighers , loss-in-weight feeders, belt scales, and general process weighing applications. The unique construction ensures that this product can be used successfully in demanding environments found in the food, chemical, and allied industries. The product meets the stringent Weights and Measures requirements throughout Europe. FEATURES • Capacities: 6–60 kg • Fully-welded, stainless-steel construction • Hermetically sealed, IP66 and IP68• Certified to OIML R-60, 3000d • Comprehensive mounting hole facility • Moment insensitive, platform size to 350 x 350 mm • Optional - FM Approved, ATEX and UKCA certified versions for use in potentially-explosive atmospheres  - IP69K full hermetic construction with true glass-to-metal seal APPLICATIONS • Food platforms• Process weighing• Multi-head packaging machines• Marine hybrid scales

Read more less

Title :- Model LOC/LOCL Low Profile Off-Center Single-Point Brand :- Celtron DESCRIPTION The Model LOC/LOCL is a low profile single-point load cell designed for platform scales and hanging scales. It is a cost-effective load cell for scales of simple construction. The LOC/LOCL is constructed of anodized aluminum, and is environmentally sealed up to IP66 levels providing excellent protection against moisture and humidity. FEATURES • Capacities: 5 to 1000 kg • Cost-effective load cell for scales of simple construction• Anodized aluminum alloy• NTEP Class III 5000S approval from 5 kg to 500 kg• OIML C3 approval from 5 kg to 500 kg• OIML C6 approval from 500 kg to 1000 kg• Optional - FM approval available - Stainless Steel version available APPLICATIONS • Platform scales (single load cell)• Packaging machines• Dosing/filling• Belt scales/conveyor scales• In-motion check weigher

Read more less

Title :- Model LPS Low Profile Single-Point Brand :- Celtron DESCRIPTIONThe Model LPS is designed for electronic scales and platform scales where only one load cell can be used and low profile is required. It is the lightest model of Celtron single-point load cell family. The design is most suitable for mass production operations.The LPS is constructed of anodized aluminum and is fully potted to IP66 levels, providing excellent protection against moisture ingression. FEATURES• Capacities: 0.6 to 200 kg• Small size with low proifle• Anodized aluminum• NTEP Class III 5000S approval from 3 kg to 30 kg• OIML C3 approval from 6 kg to 35 kg• Platform size: 16”x16”/ 40 cm x 40 cm• Optional - FM approval available APPLICATIONS• Packaging machines• Dosing/filling• Belt scales/conveyor scales• In-motion check weigher• Retail scales/counting scales  

Read more less

Title :- Model- 1260 Aluminum High Capacity Single-Point Load Cell Brand :- Tedea-Huntleigh DESCRIPTION Model 1260 is a high-performance, high-capacity single-point load cell designed for direct mounting of large platforms. Its rugged construction offers high resistance to side forces, making it suitable for a wide range of weighing applications, including bench scales and check weighing. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. For hazardous environments this load cell has an ATEX and FM approval. The two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into appropriate electronics.   FEATURES • Capacities: 50–635 kg• Aluminum construction• Single-point 600 × 600 mm platform• OIML R60 and NTEP approved• IP66 protection• Available with metric and UNC threads• Optional - FM Approval, ATEX, IECEx and UKCA certifications available. APPLICATIONS • Large platform scales• Hanging scales• Check weighing

Read more less

Title :- Model- 1510 Hermetically Sealed Single-Point Load Cell Brand :- Tedea-Huntleigh DESCRIPTION Model 1510 is a high-accuracy single-point load cell ideally suited to industrial applications which undergo regular washdown, typically platforms, wall scales and other process weighing applications in the food industry. Hermetically sealed against moisture, the all-welded construction of the 1510, in combination with a polyurethane dual-shielded cable, enables continuous operation in demanding environments while maintaining a high operating specification. The two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. FEATURES • Capacity range: 100–500 kg• Stainless steel construction• Single-point 600 x 600 mm platform• OIML R60 and NTEP approved• IP68 protection • Optional - FM Approval, ATEX, IECEx and UKCA certifications available. - Platform size 600 x 800 mm available  APPLICATIONS • Food industry platforms• Marine and hybrid scales• Process weighing hoppers• Demanding environments• Food industry platforms• Marine and hybrid scales• Process weighing hoppers• Demanding environments

Read more less